Galley - Examples
Of Our Work

Here we Installed a hot and cold outside tap

Customer had poor pressure so we installed a whole house pump.Which a massively improved the pressure

We updated the flush and fill valve.

The customer had a faulty bar mixer valve where there could not get the shower to go cold.We got this changed for them within the hour or them calling

Boiler was losing pressure.With some investigation we found that the pipe work by this radiator was not installed correctly.Atfer the repair we tested and filled in the hole.

We had a call from one of are regular customers,stating that they have very hard water and wanted to know what they could do.With this product it helps brake down the lime scale.No more salt bags

Badly installed waste pipes can causes blockages and bad drainage.We cut it all out and started again

If you cant isolate the water you cant work on the system. We always fit isolation valves when we carry out work

Hot water whole house pump.We made this customers cold water mains pressure and fitted this pump.

Faulty shower replaced

Time for a new look.Customer had an old radiator which we removed and took away.

Both of the radiators where leaking and pin holed.Both changed with inhibitor filled.

New bath and basin fitted